BAPP44-HC

Pizza Prep Table

Standard Features

  • Stainless steel cabinet construction
  • Stainless steel interior and exterior (galvanized steel back & bottom).
  • Cycolpentane Insulation – Contains no hydro-fluorocarbons (HFCs) and is environmentally friendly
  • Drop-in section:
  • Fans force cold air into this enclosed area keeping stored food items consistently cold
  • Insulated pan cover with a stainless steel divider which prevents food spillage into the storage area beneath
  • Standard 1/6 / 4” food pans are provided. Unit accommodates 6″ deep pans
  • Epoxy coated wire shelves with adjustable shelving height.
  • Side rail cutting board bracket with 9 ½” deep, 1/2” thick cutting board included
  • Four (4) 4” diameter swivel casters with front brakes standard.

  • Hydrocarbon refrigerants (R-290) – increases energy efficiency by up to 25% compared to using HFC refrigerants. It is safer for the environment and does not cause ozone depletion.
  • Self-contained system, rear mounted compressor.
  • Electrodeposition coated evaporator increases performance by maintaining the heat transfer rates over the life of the evaporator and reducing potential corrosion.
  • Innovative hot gas frame heating system reduces condensation and increases energy efficiency.
  • Refrigerators have a temperature range between 33°F ~ 39°F

  • Self closing doors
  • Durable door gasket with easy replacement.
  • Lifetime guaranteed heavy duty all metal door handles. (Ni-Cr Plated

  • Self-diagnostic digital temperature control & monitor system
  • Digital display allows for easy monitoring
  • Digital controls include automatic evaporator fan motor delay.
  • Rounded corner design gives a stylish appearance and reduces chances of injury.
  • Visual and audible door open alarm, alarm sounds when doors are not completely closed to protect against food spoilage

  • NSF/ANSI Standard 7 compliant

  • 9 ft long flexible three wire cord with molded plug

  • 2.5″ diameter casters available
  • 6″ adjustable feet available
  • Additional shelves are available.
  • Drawer models available
  • 1/3 pans available

  • 3 Year Parts & Labor
  • Additional 2 Year Compressor

 

$7,948.00

Product Specification

Capacity 11.3 cu. ft.
Exterior Dimensions ( L x D x H ) 44 3/8 x 36 1/2 x 42 inch
Net Weight 287 lb
Door 1
Shelves 2
Compressor 3/8 HP
Refrigerant R-290
Temperature Range 33℉ ~ 39℉
Input (Voltage / Hz / Phase) 115V / 60Hz / 1Ph
Amps 3.5
Pans 1/3×6
Certification Safety UL
Certification Sanitation ETL
BAPP44-HC